The Craft of Quilt Templates

How to make templates

Templates are patterns so to speak, only with templates you cut the materials you need from strong fabrics. Otherwise, if you were making patterns you would cut the templates from ordinary paper.

At what time you create templates, you are making your quilt making process easier. The surface patterns will flow consistently as well. You can use your created templates and trace along your patterns, instead of pinning graphing paper to your quilt material. You can purchase ready-made templates, however if you create your own you will save money. You can purchase transparent plastics at craft stores, or stores that carry supplies, such as craft, paper, pencils, etc. If you choose plastic, you will need to individually, trace your patterns. You will need allowance for your seams. After you create your patterns, cut your templates. The plastic templates are ideal for making larger quilts.

Straight grains make up woven textiles. The grain lines run comparably along the edges of the non-fraying edges in the materials. Across the “straight grain,” is another line known as the “cross grain.” Crafters use the term to define the lines, such as “Fabric on the grain.” You will need to eliminate the edges, by cutting it off.

The non-frayed edges are makes up the areas that have not been cut, especially around the label and the snug woven areas.

How to create basic templates:
Creating templates is as simple as tracing your footprints on paper. To create your templates you will need to choose plastic and/or paper. Once you make your choice you will need to trace your template to paper, add a few permitted seams, and then use adhesive to add your trace to a clip of hard copy, i.e. cardboard or the like and cutout your templates. Stop: before you cut your templates, first replicate copies and play with the patterns until you achieve your desired mark. Once you achieve your patterns add numbers and/or letters to mark your pattern. This will help you remember where each template goes. Next, you will cut your pattern parts out, using common scissors. Cut the outside areas only at the edges. You will need to create one template per piece to add to your quilt.

Next, trace your patterns, tracing the parts onto your plastic and/or paper. Space the parts once inch in all directions, and away from the other. Use a measuring device, such as a ruler to draw ¼-inch line at the outer outline. On your templates, create a dot. You want the dots to meet two seams per count. The dots are important to mark your stitching areas.

Next, use your direction of textile thread lines (Grain line) and convey the arrows you have created from your model parts and relocate it to your template. You have made basic templates; however, there is a variety to choose from.

Tip: You can invent templates using software installed on your computer.

In addition to the basic templates, you can make window templates. The templates are ideal for those want to pierce by hand. You can also make templates for pre-prepared designs. Window templates can assist the beginners, since you will have a marked line to follow through when you begin stitching. The windows are easy to make, yet you must follow the “hand piercing: rules to complete your patterns. You can also add templates to your window, which may include emblems such as roses, bouquets, etc. Regardless the window, basic, or other types of templates can lead up to a block/border pattern, rather a fashionable quilt.