Category: Free Articles

When you start your quilt, you will need patterns, such as rectangles, squares, cut strips, and so on. Once you gather your patterns, you will need cutting tips to complete your quilt.

Cutting the strips:
When you begin to cut your strips, you will need to align your fabric, mark, etc. Use a ruler to decide the width and start cutting once you reach your desired dimensions. For instance, if you want to create a 2-inch strip, locate the mark on your ruler and place the area side by side of your edges that square.

Once you finish cut the strips. You will need a rotary cutter to complete your mission. Your layers figures are based on the strips you cut. You can also mark and then cut your strips so that you have separate squares. You perform the same actions when making rectangles. Squares are also cut in the same fashion. However, you will need to create two squares per cut.

You will need two rectangles also per cut, since the fabric is thick. For instance, if you were to cut 3 ½ inches of fabric strips x 44 inches, you will need to cut 6 ½ inches x 3 ½ x 6 ½ inches to form your rectangles.

When you start to cut your triangles, start at a 45-degree angle. Cut the squares succeeding to cut the squares slantwise, or diagonally and in half. When cutting your triangles, keep in mind that the longer sides require seams that allow room to finish. You need about a 2-inch finish line per triangle, or side. On three sides however of your triangle, you will need to leave a width of 2 ½ inches to complete your task.

If you are not use to measuring materials, purchase a transparent, heavy-duty ruler and create templates to use as your guide.

Use your templates, aligning it on the material, and lay it in line down the edges at the three sides and use your ruler in a straight line and over your template. Once you have your template in position, you can start cutting across the width to meet your template.

Once you have cut your patterns, you will need to organize and then cut your pieces. Once you cut, your pieces try to organize them so that they do not get lost. You can categorize the pieces and stack them neatly in a desired area near your sewing station.

After you organize your pieces, you want to learn how to press properly. You will need to iron your fabric to prepare it, yet you want to learn pressing techniques, rather than strict ironing. You merely press and lift, relocate, press, release, and relocate, repeating the same cycle to press your fabric.

You will need to press your fabric as you move through the stitching stage also. You will also need to press the allowances at the seams. Head in the same direction at what time you are pressing the seams. To make your fabric durable and sturdier, press the seams to one of your sides.

Learn more about pressing, and irons to complete your quilt. Pressing is important. Once you have your patterns together, pressing down, etc, you can move onto piercing a perfect quilt.

Of course, if you are not in the mood for hand piercing, you can pick up a few tips in stitching seams and allowances, as well as appliqué. Appliqué is the process of fabric pieces sewn onto fabric, sewing shaped parts of fabric onto an underpinning to form a pattern or design.

Wall hangers make nice gifts. In addition, wall hangers make a nice decoration for your home. The flowerpots, which are pieced by hand, make fancy decorations or gifts as well. In view of the fact, we can start designing a wall hanger together.

Let’s get started:
Now understand that we are not talking about making something that will hang on your wall, rather we are speaking of a quilt. The notion behind the wall hangers is to assist beginners, since it is one of the easiest in the craft business to create.

To get started you will need one yard of fabric, i.e. green print. Add another ½ yard to tan fabric print, and another 1/3 yard of blue and yellow, ¼ peach, and ½-rust. You need at least 128 x 36 inches of pieces of fabric that coordinate. This will make up your background. Purchase another traditional-weight piece of batting in the same dimension as the background material. Add 4 yards of coordinated quilt binding fabric, and gather all-purpose thread to complete your task.

Throughout the process, you will need rotary cutters, scissors, needles, thread, thimble, pins, pincushion, and so on. The cutters will assist you with cutting ¼-inch seam allowances throughout your quilting experience. If you do not cut the ¼ as advised, your quilt will come out uneven.

Now that you have gathered your tools, it is time to start assembling the top of your quilt. Before we get started however, let’s require the pieces you purchased.

The fabric green print colors are your upper and lower borders. You should have the amount of two when you get started and you will need to re-size your inches to 2 ½ x 19 ½. You will need to of your prints for the border sides, which equals two, and the size of 2 ½ x 27 ½ inches. You can start making squares or building blocks to prepare to stitch your quilt. Use your green print as the D square and mark the amount of 36, and the inches in size at 1 ½ x 1 ½. Next, move to your tan print. You want to make the tan amount to eight, and have five blocks, or pieces. The tan should go as follow: “A-Strip, B-piece, C-strip, D-square, E-square, and F-strip.” Now the A block amounts to eight, and has inches in size at 1 ½ x 4 ½. The B block should amount to eight also, and measure to 2 ½ and 3 ½ inches. The C block should amount to 28 and measure to 1 ½ x 2 ½ inches. D amounts to 52 and measures at 1 ½ x 1 ½ inches; E is eight counts and 2 ½ x 2 ½ inches. Finish your final block and should amount to 12 and measure at 1 ½ and 3 ½ inches. Now you have your blue print, which is the C-strip and amounts to 26, measuring at 1 ½ x 2 ½ inches. The C-strip for the blue print is important, since you will use eight of the blues as borders for your quilt, and the remaining amount to create your blocks. The blue has a D-square at 12 and measures to 1 1/2 x 1 ½ inches. Now you have your yellow and peach prints left. The yellow is C-strip, D-square, and the last four is the cornerstones. C has a value of eighteen, and measures at 1 ½ x 1 ½ inches, while the D has a value of 12 and measures at 2 ½ x 2 ½ inches. Moving along the F in Peach Print Strips has the amount value of four and dimensions of 1 ½ x 3 ½ inches.

Making an undercoat for Camille is easy providing you follow a few simple steps and have your materials gathered. You will need lace edge, fabric, thread, and the ability to sew. To start you begin French stitching the seams and gather the seams at the shoulder so that it meets the front and back section of the bodice. Press after you cut the seams that overlap the armholes. Next cut 10-mm and about 2/5 inches of the thin edges of your lace, cutting it into dual nine ½-inch lengths. One length should be cut around 12 inches lengthwise.

Crisscross your stitches and add 12 inches of length to your lace at the inner region of the untreated edges of your collar. Sew the right side collectively and crisscross, stitching the lace to join with your fabric so that it meets the collar. Perform the same actions to finish around the armholes. Press the middle of the back at the fold lines until it forms a facing at the back. Stitch in a straight line down the length of your row without stitching the lace near the crown face.

The side seams should connect. Next, use fabric glue to attach the free thread at the seams of your armhole. Press the upper sections of the dress and cut your insertion lace about 2 ½ yards. Spray craft starch to the area and press. Use your inclusion lace, placing it ¼ inch onto the surface stitching row at the skirt bottom. Now, stitch a straight line so that it joins with the crown of your lace. Press the lace away from the left side of your fabric. Cross-stitch the over crown of your lace without touching the fabric, stitching only into the lace. Cut left over and press. Cut 2 ¼ yards of inclusion lace, starch and then press before placing it over a stitch line from the base line of your inclusion. First, create an outer stitch line and then press, and stitch another row, press. On the left side, cut your fabric down at the center of your stitch rows. Press your fabric on each end so that it does not touch the lace.

Cross-stitch the base line of your lace. Press, and stitch a couple of lines while collecting your stitches near the waistline. The side seams should connect, as well as the back region. Now you can pin your skirt so that it attaches to the both rights of your bodice. Starting at the middle rear, pin the yokes back and fold your seams permitting the rear back and back room.

The bodice should fit your fabric. Pull it up, collect evenly, and continue to stitch to fitting. Cut the seams and check your zigzags for evenness. Before adding, the edges of your lace to the inclusion make sure that the garment fits your doll. Test it by trying it on her.

Now trim 3 4/5 yards of the ¾-inch edges of your lace. Starch, press, and pull the thread to the crown and at the end and edges of your lace. Collect the lace, gathering it at the bottom and bundle it so that it connects to the inclusion lace. Finish with a crisscross stitch. Next, complete the edges at the rear seams. Thread the fabric and lace so that it marks your pattern, and pressing once, you make the inclusion even with your stitches. Now you can create buttonholes.

You will need to mark the area where you want to add buttons. Use fabric glue along the buttonholes and pin. Now you can stitch your buttons.

How to Craft the May Wall hanging Baskets

There is nothing like the fresh smell of spring when the flowers start to bloom, and the trees grow its natural colors. The only thing that can truly set off the natural beauty of spring is the fabulous May wall hanging baskets. I hope that you have some idea how to craft, since having a basic knowledge will help you move along smoothly. Otherwise, let’s hope you can follow directions if you intend to make your own basket.

To get started you will need materials. The materials should include 1/3 yard of fabric print, such as the beige, fawn, manila, camel, or other off-white shade. The material is used to create your back settings; as well, as add tone to a few of your blocks you will build to complete your basket.

You will need ½ yard of fabric print, such as the lighter shades of brown. The brown will help you create a beautiful outer border as well as make squares for your basket. Purchase ¾ yards of fabric print, such as the “medium brown.” The brown is used to create your handles and basket. Buy 1/3 yard of fabric print, such as the green to complete your sashing duties. You will need 35 x 30 inches of “Low-loft” pieces of fabric as well for batting. Buy 1/3 yard of “floral print.” Make sure the background is offset with white, which will help you bind and create your internal borders. Purchase 123 x 3 inches of scrap. Purchase a variety of greens to create your foliage, or leaves. You will need 64 x 4 inches of scrap to create flowers. You may prefer pink. You will need 62 x 2 inches of yellow assorted square fabrics to create the centers of your flowers. The backdrop is set off with coordinated fabrics, which you need 35 x 30 inches of pieces to complete.

Your quilt will have a finishing size at 33 x 28 inches, and the blocks will have a finishing size of 8 x 10 inches. You should purchase 6-strands of embroidery cotton floss. The shades are optional; however, since the quilt you are creating as flower knots designed in French, you may want to consider the dark and light pinks. Your thread should be the all-purpose, which include the colors light brown, green, pink, and yellow. Purchase 12 x 36 inches of freezer paper, specifically the waxed paper. You will need 2 yards of satin ribbons (Yellow) to create your bows. The satin should be around ½ inches widthwise, which the bows once finished will strap to your handles on the basket.

How to trace your handles:
Now you are ready to trace the handles of your basket. Use your off shades of white fabrics, (off white) and cut out your, A-Rectangle. You will need six, and measuring at 5 ½ x 8 ½ inches. Once you have your rectangles cut out, you will need to fold them in half and then press. Pressing will mark the core of your quilt. The fold you create is your mark. Once you fold the material in half, open, and draw your post handle lines. At the end of your task you want to expand your prefigure 200%. Now you are ready to trace your copies. On each of your rectangles created, begin tracing. The copies are your guide to cut and create your handles.

Once you finish the project you will move onto create the blocks for your basket. The process is eight easy steps and you will have finished your block building steps in how to craft the May wall hanging basket.

You are going to make a finishing quilt measuring 36 x 51 inch with the finishing 8 x 13 inch block. You will need sewing materials to complete your mission.

What materials to purchase: ¼ yard of fabric. (Greens; at least eight different shades) The green fabric will make your foliage. Purchase ¾ yards of background fabric. Creamy colors or your choice of colors: If you want the blossom lap however, choose the creams. Buy ½ yard of floral in a variety of colors and shades. The material will be used to create your external borders. Buy ¼ yard of pink fabrics. Purchase up to eight or nine shade variety. The materials are needed to make your blossoms, or flowers. Purchase scraps of yellow assorted prints. You will use these scraps to make the center flowers. You will need 1/3 yard fabric, shaded yellow to finish your internal borders. Purchase 40 x 55 inches (I yard) of part fabrics that match to create your background. You will need 1 yard of 40 x 55 inches to create your inner area, therefore purchase the measure of low-loft batting. Purchase six yards of binding material, preferably green and some all-purpose filaments/thread to coordinate with your green, yellow, pink, creamy colors, etc.

Purchase a transparent craft ruler, rotary cutter, scissors, needles, etc so that you have all your materials together to complete your blossom.

Once you purchase your materials, start trimming your parts. You will need to snip narrow pieces of your material to create borders. The material will make up your sashing as well. Your floral fabric is needed to create two A-Borders at 3 ½ x 45 ½ inches, as well as two B-Borders at 3 ½ x 36 ½ inches. Use your yellow fabric to create C and D borders. You will need two each, which the C will measure at 1 ½ x 43 ½ inch, and the D at 1 ½ x 28 ½ inches. The creamy colors are used in sashing E and F. E should value 12 at 1 ½ x 13 ½ inches, and the F should value at four, 1 ½ x 28 ½ inches.

Use the guide and trim the cream fabric creating G, cutting eight small squares per block valuing 72 and sizing at 1 ½ x 1 ½ inch. You will need 36 H blocks at 2 ½ x 2 ½ inches large per foursquare blocks. Use your pinks to make eighteen I-blocks at 3 ½ x 3 ½ inches over squares to make two counts per block. Make your J-blocks as you did the I-blocks, using the same measures. Create K-block using your pink fabric cutting 36 narrow pieces to form four strips per block at 1 ½ x 3 ½ inches. Cut L-block in the same method as you did the K block.

Use your yellow print and cut M-block. You will need four blocks per center equally 72 and the pieces should be 1 ½ x 1 ½ inch. Next, use the creams to form N and Q block. N should have a value of nine and bands per block at 1 ½ x 8 ½ inches. The Q block should have units, i.e. 18 parts and two units per block. Measurements should be 2 7/8×2-7/8. Cut your green prints. Form O-block using the amount of 27 to craft #1 green block, cutting three for each block at 2 7/8 x 2 7/8. Do the same for your P-block.

Now you are ready to start crafting your blossom quilt to keep your lap warm.

The “Evening News” Afghan is created in several ways, yet many are shades of semi-gray, light gray and mohair blends. Mohair is wool made of soft, silk and comes from the Angora goat. To start your Afghan you will need your finish, which should be around 47 inches by 70 inches. Next, you will need material.

How to choose material:
You will need smooth, wool cloth, which is closely woven without a nap, and made from tight twisted yarn. The wool should be made up of long-fibers of wool, which you can obtain from worsted cloth. Buy the cotton wool and 16 ounces of semi-gray shades. Buy another batch of heavy worsted mohair blends and 11 ounces of light colors of ash, i.e. gray. You will need 28 ounces of darker gray, preferably the sport-weight wool from alpaca. The wool is made from shaggy, long hairs of alpaca and can be a glossy cloth made of wool, cotton, rayon, etc. Use the wool, and purchase another sport-weight batch of machine washable wool. You will need 11 ounces of medium shades of gray. You will need 18 ounces of sport-weight dark gray wool and 14 ounces of “pearl gray.” Purchase another 4 ounces of gray worsted-wool (Weighty) and finally purchase a crochet E hook. The square gauge weight is 7 ½ inches, which you can match the hook.

How to get started:
To start use pattern stitches along with your yarn to create 54, 7 ½ inch squares. Start by working your borders of single crochet stitches on the squares before beginning to assemble your Afghan. You want the same square size heading in the same course. Now, we can do this a couple of ways, yet to save time it is best to learn a few tips on texture, color, bobble, chain, Chevron, etc.

Tips:
Texture is achieved with stitches that work in the loops at the front or back. If you work your texture in this way only, you can make ridges easily. To achieve an uneven texture you can work the front and the back loops.

Color tip:
To start work a double crochet, triple, and/or a double triple using light shades of yarn. Row the yarn about the post at the front of your stitch and work darker shades of yarn to achieve a masterpiece. If you want to create a cheerful wavy pattern, use dark and pale shades and shape your pattern with a flow of tiny gentle waves and/or the V-shaped Chevron stitches.

How to start bobbling
To get started bobbling, keep the most recent loop of your stitches at the hook, and you are your stitches to a favorable level of the stitches into your following stitch. Next, perform the “Yarn over Yo,” crochet and bring it through each of your loops on your crochet hook. The steps will take you to the last stitch, which completes bobbling.

How to Chevron stitch:
Chevron stitches can be achieved in two rows. You will need a base, which adding two is ideal. In the first row skip two chains and double crochet into your following chain and double crochet each of the following three chains. Finish with three double crochets in the following three chains and the next three double crochets in your following chain. Repeat by working across and ending with another two double crochets in the ending chain, and then turn. In the second row, chain stitch three double crochets in the beginning stitch and another double in all of the following three stitches, followed by three collections over the following three stitches. Double crochet in all of your following stitches, double stitch another three in the following stitch, and repeat. Work across, and at the finish adding two double crochets at the top of your turning chain stitch, and turn again. Repeat the steps using row two as your guide to fashion your pattern. Learn more about the “Evening News” Afghan to complete your project.

Down on the farm grannies around the world enjoy crafting the Country Square Afghan. Of course, some country moms take delight in creating the squares as well. In view of the fact, and considering you as one of these country lovers, we can learn how to create the Country Square Afghan.

To get started you will need a gauge of 5 inch squares to create 88 squares. You will need finishing yarn, around 45 inches times 63 inches. Purchase some smooth, wool cloth, i.e. the worsted without the nap and made up of snug twisted, long-fiber wool. You will need 20 ounces of taupe, beige, and a hook to match your gauge size. (J) To start you will create your 88 squares, using the beige and chain stitching six times to join the slipstitch, which will shape your loop.

In the first round, chain three stitches to the meet the first double crochet. Add fifteen doubles into your loop and slip stitch to the crown at the beginning of your chain. Tighten, and move to round two. Next, create a slipknot, using your taupe. Chain stitch and intersperse your hook at the back and moving to the right/left and in the region of the post of one of your doubles on the beginning round. Finish your stitch by creating a double crochet at the beginning of your double crochet and raise it back. Chain and intersperse your hook commencing at the back, then right/left moving about in the identical double crochet post. Finish with a stitch, creating a double, i.e. one double about the post and onto the following double crochet created in the first round. Repeat the steps working around the finish and add three chain stitches and a slipstitch at the crown of your beginning chain stitch. Tighten and move to round three.

In round, three combine your beige forming a slipstitch into your choice of the three chain spaces you have created. Chain three stitches to create the beginning double crochet in this step. Work in a double crochet, three chains, and another two doubles, working it into the following space. Now you have created a corner, which you will continue to repeat the steps twice, adding three doubles into the previous three chain spaces, complete with the slipstitch at the crown of the beginning chain, and tighten.

The final round, combine your beige at your corner (Choice is yours) and chain three stitches to meet the double crochet and exert a double, two chains, two doubles, and working it into your corner. In each of your previous seven stitches, double crochet and add a slipstitch at the crown of your beginning chain stitch. Tighten and begin to assemble your Afghan.

How to assemble:
Back loops are created with an 8 x 11 width, squared length, starting on the left side and facing the beige oversewing small stitch tog squares. (Whipstitch) Once you assemble, you will need to border your Afghan.

How to border: Starting with round one add your taupe yarn at choice corners and chain three stitches to meet with your double crochet. Continue to exert double, two chains, two doubles, into the identical corner and double it into the following two stitches. Chain one stitch, skip one, and double crochet into the following stitch. Before you come to the next corner, create two stitches from the previous steps and double crochet into the stitches while working two doubles, chains, and two more doubles into your corner. Repeat the steps working about the corner adding a slipstitch at the crown of your beginning chain.

Continue to round two, three, and four. In round two, chain three stitches into the next double and at the corner space. Exert two doubles, chains, and two more doubles to meet in the corner and another double before arriving at the succeeding corner. Chain one stitch and repeat your steps working about the first slipstitch at the crown of your starting chain, and tighten. Continue to round three. In the corner, combine the beige yarn and chain three stitches to meet the double and exert a double, two chains, and two doubles, working toward the following corner. Chain one stitch and to the double creating six doubles total before working to two doubles, chains, and another two doubles in your corner. Repeat the steps working about the corner, adding a slipstitch at the crown and tighten. Use your taupe yarn in the last round and work from the corner adding three chain stitches to meet the initial double. Exert a double, two chains, and another two doubles working in the corner and moving to another double within the following eight doubles. Chain 1, double, and work into the eight created doubles at the corner and repeat your steps working about the slipstitch at the crown of your starting chain. Snug the Afghan and you are finished.